Pw-CMM7106 Coordinate Measuring Machine

• Customization: Available
• After-sales Service: Support
• Warranty: 1 Year
• Model NO.: PW-CMM7106
• Operate Method: CNC
• Relative Humidity: 25-75%
• Air Consumption: 150 Nl/Min
• Min. Air Pressure: 5 Bar 0.5 MPa
• Voltage: 220 V 10%
• Frequency: 50/60 Hz
• Current: 15 a
• Overall Dimensions (mm): 1344*2019*2660(L*W*H)
• Transport Package: Export Wooden Case
• Specification: 1600Kg
• Trademark: PW
• Origin: Dongguan, China
• HS Code: 8514109000
• Production Capacity: 1000pieces/Year

Product Description

Product Features:
A coordinate measuring machine refers to an instrument that can represent geometric shapes, lengths, and circular division measurements within a hexahedral spatial range, also known as a coordinate measuring machine or coordinate measuring bed. It can also be defined as "an instrument with a probe capable of moving in three directions, moving on three mutually perpendicular guide rails, with the probe transmitting signals through contact or non-contact methods. The displacement measuring system of the three axes (such as a grating scale) calculates the points of the workpiece (x, y, z) and various functional measurements through a data processor or computer." The measuring capabilities of a coordinate measuring machine should include dimensional accuracy, positioning accuracy, geometric accuracy, and contour accuracy.
 

1. Technical Specifications:

 

(mm) Measuring Strokes			(mm) Overall Dimension				(Kg) Machine Weight	(Kg) Max. Part Weight
X	Y	Z	Lx	Ly	Lz
700	1000	600	1344	2019	2660		1600	950
Accuracy is according to GB/T 16857.2-2006(ISO 10360-2:2001)
MPEE  (mm) Maximum permissible error of indication of a CMM for size measurement (mm)						MPEP  (mm) Maximum permissible Probing Error (mm)
2.5+ L/300						2.5
Dynamic Performance
(mm/s) 3D positioning speed						(mm/s^2) 3D acceleration
520						1386

1. 1. 1. Environment Specifications:

Room Required Specifications
Room Temperature	18~22°C
Temperature Gradient (in time)	1°C /h
Temperature Gradient (in time)	2°C /24h
Temperature Gradient (in the volume)	1°C /m
Humidity Required Specifications
Relative humidity	25-75%
Air Supply System Required Specifications
Min. air pressure	5 bar [0.5 MPa]
Air consumption	150 NL/min
Electrical requirements
Voltage	220 V ± 10%
Frequency	50/60 Hz
Current	15 A
A good earth ground (less than 4 W) is required for reliable operation of the electrical controls.

Note: The Site Preparation Guide will help customer to know how to reach the Room Requirements.
 

1. Introduction to Measuring Software:

 

• extracts part data directly from CAD. Inspection routines are simplified created by pointing and clicking on CAD.
• Create auto features from a single click on the CAD model without using any menu options or dialog boxes.
• supports multiple protocols for linking to CAD. It can be neutral like UG,SAT,IGES or STEP.
• Provide probe path animation, use dynamic measuring machine models, automatically edit measurement procedures based on workpiece and fixture CAD, and automatically check probe collisions.
• Create an alignment with one click of an icon.  
• 3D Intelligent programming functions
• The new Mini Routines feature enables users to measure a selected dimension or group of dimensions from a long part program.
• Comprehensive coverage of ISO and ASME Y14.5 standards
• Provide evaluation of form and position tolerances. Shape tolerances include straightness, flatness, roundness, cylindricity, and contours. Evaluation OF POSITION TOLERANCE OF RELATIVE REFERENCE geometric ELEMENTS: PARALLELISM, VERTICALITY, INCLINATION, SYMMETRY, POSITION, COAXIALITY, CONCENTRICITY, AXIAL CIRCULAR RUNOUT, RADIAL CIRCULAR RUNout, AXIAL TOTAL RUNOUT, RADIAL TOTAL RUNout, CONTOUR.

 

1. Probe System

•  Probe Holder: CZ20i Manual Dual-Rotating Indexing Probe Holder

Features: Manually rotating probe holder with anti-collision protection device and automatic suction cup probe interface.

Technical Parameters:

Item		Parameter
Indexing Mechanism	Around A-axis (Horizontal Axis)	Range 0°~90°, Minimum Step Angle 15°
	Around B-axis (Perpendicular Axis)	Range ±180°, Minimum Step Angle 15°
Spatial Position		168 positions
Maximum Output Torque		0.45Nm
Maximum Length of Extension Rod Allowed		300 mm
Weight		645g

•  Probe: Contact Probe

Features: Includes trigger and scanning probe modules, capable of three-dimensional continuous scanning measurement and point-triggered measurement, with anti-collision protection device.



Technical Parameters:

Item	Parameter
Sensing Direction	±X      ±Y     +Z
Probe Interface	M2
Weight	22g
Rated Life	>10^6times

Probe Set

Name	Quantity (Pieces)
Probe	3
Extension Rod	2

Calibrator: One Φ20 standard sphere.

1. Installation at Customer Site

All boxes shall be opened only under the supervision of a SEREIN engineer. During the installation, support for connections, unloading, internal transportation, unpacking and placement must be provided by the buyers. Supplier should offer technical guide. Only after the environmental conditions conforms to the requirements of this agreement, SEREIN Engineers will carry out the work related to the machine installation, debugging and final inspection in the installation site. The final acceptance inspection should follow the standard of JJF1064-2004(This standard is the equivalent of ISO 10360-2000 )
 

1. Training:

Test Location: Customer's site.
Duration:Four Days
Contents: Equipment application and maintenance
Attendees: 2 persons. People attending the training are expected to have some familiarity with metrology knowledge and PC application skill. And Cost for travel, food and accommodation during the training shall be paid by themselves.
Additional Information: After using the equipment for a period of time, any issues encountered during use can be summarized, and an engineer can be arranged to provide on-site guidance.

 

1. After-market Service:

(1)
1 year (12 months) guarantee is free of charge after Final Acceptance. But the buyer will be responsible for the parts-changed expense If the damage is caused by human error.
(2)
If the CMM has a problem,  Repair in time. We promise to respond within 24 hours and deal with any failures you encounter in use in a timely manner .

Configuration

NO	Description	Specifications &Technical Parameter	Origin/manufacturer	Set	Real pictures
1	Machine	PW-CMM 7106 CMM CNC Travel Dimensions: 700mm × 1000mm × 600mm	PW	1
2	Software System	CMM special measuring software	PW	1
3	Control System	YM-C-01 high-speed high-accuracy control system(include the Jogbox)	PW	1
4	Jogbox	PW-JOY-02 include the Jogbox	PW	1
4	Detection System	CF20 Trigger Probe	PW	1
7	Probe system	CZ20i Automatic Indexing Probe Head	PW	1
8	Calibration sphere	Ф 20mm,ceramic	PW	1
9	stylus kit	Probe Set: stylus kit#7(M2,5pcs)	PW	1
10	Computer system	LENOVO 4.0 G processor /  1 T hard disk/ /Windows 10 Chinese professional edition, 21.5" Monitor	LENOVO	1

 

• KIT7#:Probe Set:

No.	Specification	Order No.	Quantity	Remark
1	1mm Dia.20 mm long ball stylus	Ruby 1.0*20 Long M2 Thread	1
2	2mm Dia.20 mm long ball stylus	Ruby 2.0*20 Long M2 Thread	1
3	3mm Dia. 20 mm long ball stylus	Ruby 3.0*20 Long M2 Thread	1
4	20mm styli Extensions		1
5	30mm Styli Extensions		1
Total	5