| After-sales Service: | Support |
|---|---|
| Power Supply: | 220V |
| Certification: | CE, ISO, SGS |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier PCT high-pressure accelerated aging test box is used to test the performance test of products in storage, transportation, and use under high temperature, high temperature, high humidity, and pressure climatic environment. It is mainly used for electrical and electronic products, components, parts, and metal materials. And its magnetic materials are tested under the climatic conditions of high temperature, high humidity, and pressure to test the physical and other related properties of the product. After the test, the performance of the product can be judged through verification to meet the requirements for product design, Improvement, verification, and factory inspection use.
a. Outer wall material: stainless steel plate SUS304#; thickness: 1.2mm;
b. Inner wall material: stainless steel plate SUS304#; thickness: 3.0mm;
c. Box insulation material: glass fiber;
d. Door insulation material: fiberglass;
e. Round inner box, stainless steel round inner box structure, in line with industrial safety standards, can prevent condensation and dripping during the test;
f. The arc liner, stainless steel arc type liner design, can avoid the direct impact of steam overheating;
g. Precise design, good airtightness, low water consumption, and continuous operation for 999H every time the automatic water is added;
h. Automatic access control, back pressure type non-external force flat door, automatic temperature and pressure safety detection, automatic access control lock control system, advanced safety door handle design (door handle is safer without force), test door when the inner box has greater than normal pressure Will be protected by backpressure and cannot be opened; protect the safety of operators;
i. Patented packing, when the pressure of the inner box is greater, the packing will have back pressure to make it more closely integrated with the box body, which is different from the traditional extrusion type that depends on external force from the outside to the inside. When the pressure inside the box is 1Kg/ When cm2, the box door will suck inward with suction of 1Kg/cm2 to achieve a sealing effect; when the pressure in the box is 2Kg/cm2, the box door will suck inward with suction of 2Kg/cm2 to achieve a sealing effect; The tightness of the box door is completely determined by the pressure inside the box, so as to better protect the box door and prolong its life;
j. Before the start of the experiment, the equipment will automatically extract the unsaturated air from the original inner box, so that each test can ensure that the test sample is completed in a saturated vapor environment to ensure the consistency of the test results.
| Product name | PCT High pressure accelerated aging test chamber |
| Model | PCT-35 |
| Nominal internal volume | 43L |
| Inner box size | 350×450 mm(φ×D) circular laboratory |
| Dimensions | W900 XD800 XH1300mm |
| Weight | About 100kg |
| Test environment conditions | When the ambient temperature is +25ºC, the relative humidity is ≤85%, and there is no sample in the test box |
| Temperature range | 100ºC~135ºC can be set arbitrarily |
| Humidity range | 100%RH. (Saturated vapor humidity) |
| Pressure range | 1.5~3.0Kg/cm2 (including 1atm) |
| Time limit | 0 ~ 9999H |
| Heating time | RT ~ 120ºC within 35 minutes |
| Boost time | 0.0Kg/cm2 ~ 1.00Kg/cm2 within 35 minutes |
| Temperature resolution accuracy | Temperature: 0.1ºC |
| Temperature control accuracy | Temperature: ±0.5ºC |
| Pressure control accuracy | ±0.2Kg/cm2 |
| Temperature uniformity | Temperature: ±2% |
| Cycleway | Water vapor natural convection circulation method |
| Box door | Backpressure type no external force plane door |
| Control panel | Temperature controller display, time setting device, an operation switch, pressure gauge, alarm indicator |
| Power distribution control cabinet | Power distribution board, exhaust fan |
| Heater | Titanium alloy heating tube |
| Power cord hole | Located on the back of the box |
| Temperature Controller | Imported LED display precision temperature controller |
| Screen display function | Direct display of temperature setting (SV) and actual (PV) values |
| Test box | Adjustable over-temperature and low-water level protection; limit over-temperature of adjustment channel; over-voltage protection; leakage protection; overload and short-circuit protection |
| Installation site | The ground is flat and well ventilated; there is no strong vibration around the equipment; there is no flammable, explosive, corrosive substances and dust around the equipment; proper use and maintenance space is left around the equipment |
| Environmental conditions | Temperature: 5ºC~30ºC; Relative humidity: ≤85%; Air pressure: 86kPa~106kPa |
| Power supply | AC220V 1 phase 3 wires Allowable voltage fluctuation range: ±5% Allowable frequency fluctuation range: 50 Hz ± 0.5 Hz The grounding resistance of the protective earth wire is less than 4Ω The user is required to independently configure the corresponding capacity air switch for the equipment at the installation site |
| Installed power | About 2.5 KW |
| Maximum current | 10 A |
| Air switch | 32 A |
Company Introduction:
PW (Guangdong) Instruments Co., Ltd. was established in March 2007, a national high-tech enterprise, located in Tongzheng Intelligent Industrial Park, No. 2, North 3rd Road, Tingshan Square, Houjie Town, Dongguan City, Guangdong Province. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry, and has accumulated a large number of high-quality customers. In order to better serve customers in East China, the company established PW Instruments (Shanghai) Co., Ltd. in Shanghai and set up an instrument exhibition hall and testing center in Suzhou Industrial Park.
Corporate Culture:
Vision: Become a world-renowned instrument manufacturer
Mission: Provide customers with high-quality testing equipment
Values: Customer satisfaction is our aim.
Q: Are your company a trading one or a factory?
A: Factory, More than 15 years focusing on test equipment field, 10 years exporting experience.
Q: After an order is placed, when to deliver?
A: Generally about 10-25 days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.
Q: What about the warranty with after-sales services?
A: The testing machine is guaranteed for 12 months by PW, we can help you to repair your problem controller freely, even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handle guest problems and complaints in a professional and timely.
Q: What about the product's services and quality?
A: Each piece of equipment must be carried out 100% quality examination and test when shipping and delivering goods. Product use training, each of our products provides video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A: Considerate Service Different countries plugs, manually change the voltage from 110V to 220V, insurance indicator.
Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}