Precision Lab Oven Measuring Instrument for Drying & Sterilization

Product Description

Product Description

It is used for drying, baking, wax melting and sterilization in industrial and mining enterprises, laboratory rooms, scientific research units, etc.

Parameters and temperature control system:

 

Item	Specification
Temperature Controller	PID microcomputer controller (Taiwan Pine). Simultaneous PV/SV display, button setting. Temperature adjustable from ambient temp to max temperature.
Timer Range	99.9 sec-999 hr, configurable in hour / minute / second.   a. Continuous operation   b. Heating cut-off & alarm upon timer completion after reaching target temperature
Temperature Sensor	CA(K) type sensor probe
Output Voltage	3-32V
Power Control	Solid-state relay for power output (Taiwan Yangming). PID micro-computer contact output; signal auto-adjust output ratio, precise control of temperature overshoot.
Heating Element	Stainless steel heater
Temperature Range	RT ~ 200ºC
Heating Rate	RT-100ºC within approx. 15 minutes
Control Accuracy	±1ºC
Internal Temperature Uniformity	±4ºC (no-load condition)

Air supply system:

1. Forced horizontal air circulation, the air source is driven by the circulating motor to drive the wind wheel through the electric heater, and the hot air is sent from the air duct to the inside of the oven, and the hot air after use is sucked into the air duct to become the air source to recirculate heating, thereby reducing Energy loss and ensure the temperature uniformity in the box, when the temperature drops caused by the opening of the door, the air circulation system can also be used to quickly restore the temperature value of the working state.
2. The motor is a long-shaft high temperature resistant type with a power of 1hp/50Hz (Taiwan).
3. The 10.5-inch wind wheel is a multi-blade turbine type.
4. Adjustable wind deflector is installed inside.
5. There is an air inlet at the rear and two sets of air outlets on the top, and the exhaust air volume is adjustable.

Safety protection system:

1. Over-temperature protection system: When the temperature is out of control due to external forces, the system will automatically stop the power supply of the whole machine when the set temperature exceeds 10 degrees, thereby protecting the safety of your products and machines;
2. Fuse and overcurrent protection system: When the power of the whole machine exceeds the normal power due to high voltage or other reasons, the system will automatically cut off the power to protect the industrial control components of the whole machine from being damaged;
3. Motor overheating protection to prevent motor damage caused by motor overheating, phase sequence protection.

Product Parameters

  
1.Inner dimension: 100(W)×120(H)×80(D)±1cm;
2.External dimensions: 122(W)×178(H)×96(D)±1cm; take the actual product as the standard
3.The controller is located on the top of the machine, the double doors open from right to left;
4.The inner material is mirror stainless steel plate thickness of 1.0mm;
5.The outer material is SECC steel plate thickness ≥1.2mm powder baking paint treatment;
6.The thermal insulation material is 100K high-density glass rock wool with a thickness of 100mm, which has good thermal insulation and maximizes the temperature insulation.
7.There are two layers inside, two stainless steel grids (mesh shape);
8.The tight material is high temperature resistant silica gel strip;
9.Glassless window;
10.Equipped with movable casters and fixed feet. 

Company Profile

 

Company Introduction:

PW (Guangdong) Instruments Co., Ltd. was established in March 2007, a national high-tech enterprise, located in Room 901, Building 11, No. 2 Houjie Dongye Road, Houjie Town, Dongguan City, Guangdong Province, China . Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry, and has accumulated a large number of high-quality customers. In order to better serve customers in East China, the company established PW Instruments (Shanghai) Co., Ltd. in Shanghai and set up an instrument exhibition hall and testing center in Suzhou Industrial Park.

Corporate Culture:

Vision: Become a world-renowned instrument manufacturer
Mission: Provide customers with high-quality testing equipment
Values: Customer satisfaction is our aim.








 

 

Certifications

Packaging & Shipping

 

 

FAQ

Q: Are your company a trading one or a factory?
A: Factory, More than 15 years focusing on test equipment field, 10 years exporting experience.

Q: After an order is placed, when to deliver?
A: Generally about 10-25 days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.

Q: What about the warranty with after-sales services?
A: The testing machine is guaranteed for 12 months by PW, we can help you to repair your problem controller freely, even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handle guest problems and complaints in a professional and timely.

Q: What about the product's services and quality?
A: Each piece of equipment must be carried out 100% quality examination and test when shipping and delivering goods. Product use training, each of our products provides video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A: Considerate Service Different countries plugs, manually change the voltage from 110V to 220V, insurance indicator.

Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.