Customization: | Available |
---|---|
After-sales Service: | Support |
Power Supply: | AC3ø 380V 30A 50Hz |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The salt spray test chamber produced by our company is used to test the corrosion resistance of the products after the surfaces of various materials have been subjected to corrosion treatment such as electroplating, anodizing, spraying, and anti-rust oil; in order to analyze the samples under specific environmental conditions and evaluation.
Model | PW-CCT960 |
Internal size | 160x100x60(WxDxH)cm |
External size | 265X145X172 (WxDxH) cm without temperature and humidity host (W125*D60*H110) |
Power supply | AC3ø 380V 30A 50HZ |
Test box interior | The PP is integrally formed, the thickness is 10mm, and the temperature resistance of the material can reach -10~90ºC, so that our equipment will not be deformed for a long time using CASS, ACSS and NSS tests. |
Thermostatic case | GRP and PP gray temperature-resistant and impact-resistant board are used, and PP board mainly plays the role of protection and beautification. |
Chamber upper cover | It adopts PP one-piece molding, the thickness is 10mm, and the temperature resistance of the material can reach -10~90ºC, so that our equipment will not be deformed for a long time in the CASS, ACSS, NSS test (automatic opening and closing). |
Test refill drum | Using PP white board, the capacity is 100L. |
Test chamber basket frame | Using GRP temperature-resistant angle material, the angle can be 20°±5° from the product test angle, and the test bracket can be customized. |
Saturated air drum | Made of SUS#304 stainless steel plate, thickness 2mm, with automatic water level controller to avoid the inconvenience of manual water addition. |
Salt spray test method | (1) Laboratory: 35ºC±2ºC (2) Saturated air barrel: 47ºC±2ºC |
Corrosion resistance test method | (1) Laboratory: 50ºC±2ºC (2) Saturated air barrel: 63ºC±2ºC |
Temperature and humidity drying test | Laboratory temperature: 40ºC~60ºC±1 Humidity: 30±5%RH and natural humidity drying, damp heat control system: internal installation of humidifier, dehumidifier, heater, circulating fan, drainage device, water supply device, water level controller, over-temperature protector, humidification pipe anti-drying The device, circulating air duct, damper, etc. use a circulating fan for strong air supply and circulation, built-in air space, stainless steel circulating fan, through the damper and diffuser, the air is blown out from the air duct evenly, and the temperature and humidity in the mixing room are adjusted well. Distributed to the test space, so as to achieve the purpose of uniform temperature and humidity control. |
Damp heat test | GB2423.3-93 "Basic Environmental Test Procedures for Electrical and Electronic Products" Test Ca: constant damp heat test method. (Here is just a test that meets the specified temperature and humidity) a. Test temperature: 23~50ºC±2ºC. b. Test humidity: 45%~98%±2%RH |
Company Introduction:
PW (Guangdong) Instruments Co., Ltd. was established in March 2007, a national high-tech enterprise, located in Room 901, Building 11, No. 2 Houjie Dongye Road, Houjie Town, Dongguan City, Guangdong Province, China. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry and has accumulated a large number of high-quality customers. In order to better serve customers in East China, the company established PW Instruments (Shanghai) Co., Ltd. in Shanghai and set up an instrument exhibition hall and testing center in Suzhou Industrial Park.
Corporate Culture:
Vision: Become a world-renowned instrument manufacturer
Mission: Provide customers with high-quality testing equipment
Values: Customer satisfaction is our aim.
Q: Are your company a trading one or a factory?
A: Factory, More than 15 years focusing on test equipment field, 10 years exporting experience.
Q: After an order is placed, when to deliver?
A: Generally about 10-25 days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.
Q: What about the warranty with after-sales services?
A: The testing machine is guaranteed for 12 months by PW, we can help you to repair your problem controller freely, even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handle guest problems and complaints in a professional and timely.
Q: What about the product's services and quality?
A: Each piece of equipment must be carried out 100% quality examination and test when shipping and delivering goods. Product use training, each of our products provides video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A: Considerate Service Different countries plugs, manually change the voltage from 110V to 220V, insurance indicator.
Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.