| After-sales Service: | Support |
|---|---|
| Warranty: | 1 Year |
| Max Diameter of Workpiece: | <500mm |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
1. Appearance: high quality appearance, the body adopts rounded shape, the surface is treated by matte stripes, and adopts flat non-reaction handle, easy to operate, safe and reliable.
2. Watch window: rectangular double-layer glass view window, can be used for test product observation in the test, the window with anti-sweat electric heater device can prevent water condensation droplets, and high brightness PL glow lamp to keep the box lighting.
3. Water supply system: with an external water supply system, convenient to supplement the humidification barrel water supply, and automatic recovery use.
Compressor: The compressor circulation system adopts the French "Taikang" brand, which can effectively remove the lubricating oil between the condensing tube and capillary tube and the whole series Adopt the environmental protection cold coal (R404, 507)
4. Control mode: intelligent PID + SSR/SCR positive and negative bidirectional synchronous output, including advanced slope control logic.
5. Controller: with multi-stage program editing and temperature, humidity can be done quickly (OUICK) or ramp rate (SLOP) control.
6. System capacity: 150 groups of programs can be logged in x 1500 segments, the number of segments can be divided arbitrarily, and the programs can be freely linked with each other.
7. Cycle setting: 9999×999 cycles can be executed, and 5 independent groups of partial cycles can be cut out again.
8. Time signal: 3 sets of timing control output interface, with 10 kinds of time control mode, convenient to execute the timing planning of external driver start/stop.
9. Safety detection: 15 full-featured system detections to ensure the safety of machine operation. And can automatically display the fault time, items and troubleshooting measures.
GB-2423.1-89 (IEC68-2-1) Test A: Low temperature test method
GB-2423.2-89 (IEC68-2-2) Test B: High temperature test method
GJB360.8-87(MIL-STD-202F)High temperature life test
GJB150.3(MIL-STD-810D)high temperature test method
GJB150.4(MIL-STD-8101D)Low temperature test method
GB2423.3-93 (IEC68-2-3) Test Ca: Constant humidity and heat test method
GB2423.4-93 (IEC68-2-30) test Db: alternating hygrothermal test method
GJB150.9-93 (MIL-STD-810D) damp heat test method
| Model | TS-80 / TS-150 / TS-225 / TS-408 / TS-800 / TS-1000 |
| Inner dimension (W*H*D)CM |
80L:40×50×40, 150L:50×60×50, 225L:50×75×60, 408L:60×85×80, 800L:100×100×80, 1000L:100×100×100 |
| External dimension (W*H*D)CM |
80L:93×131×81, 150L:103×141×91, 225L:108×162×112, 408L:117×172×132, 800L:160×187×132, 1000L:150×195×165 |
| Volume (L) | 80L, 150L, 225L, 408L, 800L |
| Heating speed | 0ºC~100ºCabout 20min, -20ºC~100ºCabout 35min, -40ºC~100ºCabout 45min, -70ºC~100ºCabout 60min |
| Cooling speed | 20ºC~0ºCabout 20min, 20ºC~-20ºCabout 45min, 20ºC~-40ºCabout 60min, 20ºC~-70ºCabout 90min |
| Tempt. range | 0ºC, -20ºC, -40ºC, -70ºC~150ºC |
| Temp. Distribution uniformity | ±0.5ºC |
| Temp. stability | ±0.3ºC |
| Humi. stability | ±2.5%RH |
| Humi. range | 20%~98%RH (can be customized according to customer's requirement: low humidity type can reach 5%RH) |
| Program control | 120 groups of 1200 segments programming, 999 cycles setting, and with multiple PID control function, with RS-232 computer interface control. |
| Humidification system | surface evaporation type, with humidifier water shortage power failure and overheating protection. |
| Dehumidification system | freezing latent heat dehumidification method |
| Cooling system | -20ºC above using one element fully sealed air-cooled freezing system, -40ºC below using binary fully sealed air-cooled freezing system |
| Water supply system | built-in pure water generation device, without artificial water, can be directly from the water, and with a water shortage warning device |
| Internal and external materials | SUS#304, stainless steel as a whole |
| Insulation material | Rock wool and rigid PU foam insulation |
| Safety device | no fuse switch, compressor overload, cold coal high, over temperature, power off, protection switch, temperature limit protection and fault alarm device |
| Temperature and humidity regulation | Balanced temperature and humidity regulation mode |
| Standard equipment | automatic defogging glass window, two pieces of adjustable upper and lower compartments, test holes, operating room light, moving wheels |
| Optional equipment | recorder |
| Power supply | AC220V/380V±10%, 50/60Hz |
Company Introduction:
PW (Guangdong) Instruments Co., Ltd. was established in March 2007, a national high-tech enterprise, located in Tongzheng Intelligent Industrial Park, No. 2, North 3rd Road, Tingshan Square, Houjie Town, Dongguan City, Guangdong Province. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry, and has accumulated a large number of high-quality customers. In order to better serve customers in East China, the company established PW Instruments (Shanghai) Co., Ltd. in Shanghai and set up an instrument exhibition hall and testing center in Suzhou Industrial Park.
Corporate Culture:
Vision: Become a world-renowned instrument manufacturer
Mission: Provide customers with high-quality testing equipment
Values: Customer satisfaction is our aim.
Q: Are your company a trading one or a factory?
A: Factory, More than 15 years focusing on test equipment field, 10 years exporting experience.
Q: After an order is placed, when to deliver?
A: Generally about 10-25 days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.
Q: What about the warranty with after-sales services?
A: The testing machine is guaranteed for 12 months by PW, we can help you to repair your problem controller freely, even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handle guest problems and complaints in a professional and timely.
Q: What about the product's services and quality?
A: Each piece of equipment must be carried out 100% quality examination and test when shipping and delivering goods. Product use training, each of our products provides video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A: Considerate Service Different countries plugs, manually change the voltage from 110V to 220V, insurance indicator.
Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}