Air-Cooled Three Chamber Thermal Shock Tester Equipment Made in China

• After-sales Service: Support
• Power Supply: 220V
• Certification: CE, ISO, SGS
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: PW-CTS3-80-55A
• Warranty: 1 Year
• Model: Pw-Cts3-80-55A
• Internal Volume: 80L
• Weight: 800 Kg
• High Temperature: 60ºC~150ºC
• Low Temperature: -10ºC~-55ºC
• Dimensions of The Test Chamber: W(500)mm × H(400)mm × D(400)mm
• Overall Dimensions: W(1650)mm × H(1720)mm × D(1680)mm
• Transport Package: Wood
• Specification: 100L
• Trademark: PW
• Origin: China
• HS Code: 8514109000
• Production Capacity: 1000pieces/Year
• Package Size: 1655.00cm * 1720.00cm * 1680.00cm
• Package Gross Weight: 800.000kg

Product Description

 

Product Description

For testing the degree to which a material structure or composite material can endure instantaneous and continuous exposure to extremely high and low temperatures in order to test the chemical changes or physical damage caused by thermal expansion and contraction in the shortest possible time. Suitable for testing physical changes in electronics, vehicles, metals, chemicals, building materials, communication components, defense industry, aerospace industry, electronic chips IC, IT, etc.

Features

1, the test system structure design is advanced and reasonable, GB/T 2423.1-2001, GB/T 2423.2-2001, GB/T 2423.22-2001, GJB 150.3-2001;
2, the main functional components of the test chamber used world-famous brand configuration, advanced and reliable technical principles, noise and energy saving to get the best control - its performance can replace similar foreign products;
3, the whole machine refrigeration system using PID algorithm control, without the need to add a heating tube to consume extra power, power saving up to 35%;
4, the equipment has good operability, maintenance, good temperature stability and durability, good safety performance, no pollution of the environment and personal health hazards;
5, change the traditional hot and cold confrontation control method, using the latest cold balance control technology, which can achieve 500 ~ 1000 cycles without frosting, improve efficiency, save test time, more power saving, energy saving, and environmental protection;
 

Product Parameters

    
1. Product name: Three-chamber Thermal Shock Tester
2. Specimen Restriction:
This test equipment prohibits:
Testing or storage of specimens of flammable, explosive, or volatile substances
Testing or storage of corrosive substances
Testing or storage of biological specimens
Testing or storage of specimens from strong electromagnetic emission sources
Testing or storage of specimens of radioactive substances
Testing or storage of specimens of highly toxic substances
Testing or storage of specimens which may produce flammable, explosive, volatile, highly toxic, corrosive or radioactive substances during testing or storage
3. Volumes, dimensions, and weights:
3.1. Nominal internal volume: 80L
3.2. Dimensions of the test chamber: W(500)mm × H(400)mm × D(400)mm
3.3. Overall dimensions: approx. W(1650)mm × H(1720)mm × D(1680)mm
3.4. Weight: 800 KG
4. Performance:
4.1. Test environment conditions Ambient temperature +5~+28ºC, relative humidity ≤85%, no specimen in the test chamber
4.2. Test methods: GB/T 2423.1-2001, GB/T 2423.2-2001, GB/T 2423.22-2001, GJB 150.3-2001
4.3. High and low-temperature zone temperature range:
1. High-temperature zone part: 60ºC~200ºC
2. Low-temperature zone part: -10ºC~-70ºC
3. Test area part: 150ºC~-55ºC
4.4. Temperature test range:
1. High temperature: 60ºC~150ºC
2. Low temperature: -10ºC~-55ºC
4.5. High and low-temperature transition time ≤10S
4.6. high and low-temperature recovery time 3~5min (under non-linear no load)
4.7. Control Accuracy Temperature: ±0.2ºC
(refers to the difference between the controller set value and the controller measured value)
4.8. Temperature fluctuation: ≤ 0.5ºC (temperature fluctuation is half of the difference between the highest and lowest measured temperature at the center)
4.9. Temperature error: ≤±1ºC (the average temperature of the displayed value of the studio temperature controller minus the average temperature measured at the center point)
4.10. Temperature uniformity: ≤ 2.0°C (temperature uniformity is the arithmetic mean of the difference between the highest and lowest temperatures measured in each test)
4.11. Pre-heating zone heating rate ≥3°C/min (non-linear)
4.12. Pre-cooling zone cooling speed ≥2ºC/min (non-linear)
4.13.Working noise:
A sound level ≤70dB(A)
(measured in the ring temperature of 25 ºC, echo less sound insulation room; using A weighting, test the average of 8 points; each test point level from the noise source 1 m, height from the ground 1 m)
4.14. Meet the test method.
GB/T2423.1-2008(IEC60068-2-1:2007) Low temperature test method Ab
GB/T2423.2-2008(IEC60068-2-2:2007) High temperature test method Bb
GB2423.22-87 Test method for temperature change
GJB150.5-86 Temperature shock test
GJB360.7-87 Temperature shock test
GJB367.2-87 Temperature shock test
(Heat capacity per cubic meter of load not greater than 35kg/m3 steel, wet and heat test without active wet and heat load)
 

Company Profile

 

Company Introduction:

PW Instruments (Guangdong) Co., Ltd. was established in March 2007, a national high-tech enterprise, located in Tongzheng Intelligent Industrial Park, No. 2, North 3rd Road, Tingshan Square, Houjie Town, Dongguan City, Guangdong Province. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry, and has accumulated a large number of high-quality customers. In order to better serve customers in East China, the company established PW Instruments (Shanghai) Co., Ltd. in Shanghai and set up an instrument exhibition hall and testing center in Suzhou Industrial Park.

Corporate Culture:

Vision: Become a world-renowned instrument manufacturer
Mission: Provide customers with high-quality testing equipment
Values: Customer satisfaction is our aim.

 

Certifications

 

FAQ

Q: Are your company a trading one or a factory?
A: Factory, More than 15 years focusing on test equipment field, 10 years exporting experience.

Q: After an order is placed, when to deliver?
A: Generally about 10-25 days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.

Q: What about the warranty with after-sales services?
A: The testing machine is guaranteed for 12 months by PW, we can help you to repair your problem controller freely, even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handle guest problems and complaints in a professional and timely.

Q: What about the product's services and quality?
A: Each piece of equipment must be carried out 100% quality examination and test when shipping and delivering goods. Product use training, each of our products provides video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A: Considerate Service Different countries plugs, manually change the voltage from 110V to 220V, insurance indicator.

Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.